GPC-XP Controller
Includes: GPC-XP Controller mounted in a plastic enclosure with mounting feet. The GPC-XP Controller is used for controlling equipment or processes that cannot be controlled using a standard HVAC unit controller. Prism 2 software is required to interface with the GPC-XP Controller. The GPC-XP Controller provides the flexibility to control, schedule and/or monitor equipment such as unit heaters, exhaust fans, motorized louvers, and other mechanical equipment. In addition, the GPC-XP provides 1 Lead/Lag start function. The GPC-XP has (8) configurable analog inputs which will accept signals from 10K Ohm Type III thermistor temperature sensors or from 4-20mA, 0-5VDC, or 0-10VDC transmitters. The inputs are set for the desired scaling by means of a jumper bar. Custom formulas created by available math functions and operators can be used in conjunction with the analog inputs to create a calculated value to be used and displayed for a specific analog input. An additional modular input is available for AAON communicating sensors. In conjunction with the 8 configurable analog inputs, the GPC-XP also supports 8 wet contact binary inputs, which can be configured for either normally open or normally closed operation. The GPC-XP has 8 relay outputs for on/off control and 4 analog outputs for proportional control signals. Highest/lowest/average of the analog input values can be used in the GPC-XP logic or broadcast to other controllers on the control system loop. The GPC-XP also has 8 separate 2 events per day schedules, which can be assigned to any input or output for operational control or alarm recognition based on time of day. These schedules can also be configured to broadcast to other AAON HVAC equipment installed on the control system loop.
AAON has add-on hardware that connects to the GPC-XP to simulate analog and binary inputs for simulation or demonstration purposes.
ASM01868
OE338-23-GPC-XP
